How Often Should I Inspect My Plumbing for Leaks?
Last updated October 31, 2026
The short answer
Why Twice a Year Works
A twice-yearly inspection catches most slow leaks before they cause real damage. Check under sinks, around toilets, and along exposed pipes in your garage or crawl space. Look for damp spots, discoloration, or a musty smell that can signal a hidden leak.
Monthly, spend a few minutes checking your water meter. Turn off all water in the house, note the meter reading, and check again after an hour. If the reading changed, you have a leak somewhere. This simple test helps you spot issues between the bigger inspections.
- Look under every sink for drips or stains
- Check toilet bases for water or wobble
- Feel exposed pipes for moisture or dampness
- Inspect appliance hoses for cracks or bulges
- Watch the water meter for unexpected use
What to Check During Each Inspection
Start with the most common leak spots. Kitchen and bathroom sinks, toilet supply lines, and washing machine hoses are frequent culprits. Run your hand along the underside of pipes to feel for dampness that you might not see.
Look at the connections where pipes meet fittings or appliances. Tighten any loose fittings gently, but do not overtighten. Check the caulk around tubs and showers for gaps or peeling, since water can seep through and cause hidden damage.
Also check your water heater for rust or moisture around the base, and inspect the pressure relief valve for drips. If you have a slab foundation, note any warm spots on the floor or the sound of running water when nothing is on, which could point to a slab leak.
After Storms and Temperature Shifts
After any major storm, inspect your plumbing for new leaks. Heavy rain can saturate the ground and shift soil, which may stress underground pipes or cause foundation movement. Check your yard for soggy spots or sinkholes.
Also inspect after a hard freeze or a sudden heat wave. Temperature swings can make pipe joints expand and contract, loosening connections. Run all faucets briefly after a freeze to confirm water flows normally and no pipes have burst.
If you notice a new leak after a storm or temperature shift, shut off the water to that area if possible, and address the issue quickly. A small crack can worsen fast, leading to more extensive cleanup and repairs.
When to Call the Pros
You can handle many small leaks yourself, like replacing a worn washer or tightening a loose fitting. But for leaks you cannot see, or if you suspect a leak inside walls, under the slab, or in the main line, call local water damage pros. They have specialized tools to detect hidden moisture without tearing into your home.
Also call the pros if you notice a sudden drop in water pressure, hear running water when everything is off, or see water stains spreading on ceilings or walls. These signs often indicate a larger issue that needs professional attention.
Before any work begins, ask about the process and what you can expect. The pros usually perform a water damage inspection to locate the source and assess the extent. This helps you understand the scope of the problem and what cleanup may involve.
- You hear running water with everything off
- Your water bill jumps without a reason
- You see water stains or peeling paint on walls
- You feel warm spots on the floor with slab heat
- You smell musty or moldy odors in a room
Talk to someone now
Water keeps spreading into floors and walls, so it is worth acting early. Calls are answered 24/7.
Call Now (281) 717-6340Frequently asked questions
Can I inspect my own plumbing for leaks?
Yes, you can inspect visible pipes, fixtures, and appliance hoses yourself. Look for drips, dampness, stains, and unusual sounds. For hidden leaks behind walls or under the slab, professional detection is often needed. You can also monitor your water meter monthly to catch leaks you cannot see.
What are the first signs of a slab leak?
Common signs include a higher than normal water bill, the sound of running water when all fixtures are off, warm spots on the floor, and unexplained damp areas or cracks in flooring. If you notice these, turn off your water main to limit damage and contact the pros for an inspection.
How long does it take for a small leak to cause damage?
A small drip can waste thousands of gallons over a year and cause damage to wood, drywall, and flooring within weeks. Mold can begin growing in 24 to 48 hours on wet materials. That is why it is important to fix leaks promptly and dry any affected areas quickly.
More questions and answers
- Why Is Hail Damage on Roofs Often Not Visible From the Ground?
- Why Does Storm Damage Often Get Worse If Not Fixed Fast?
- Can Lightning Strike a House Through Plumbing?
- What Is the Most Common Source of Hidden Water Leaks?
- Why Does Fall Leaf Buildup in Gutters Cause Roof Leaks?
- How Do You Inspect Electrical Systems After a Lightning Strike?
- All articles